TM3000F/PIN-S Positive and negative pressure Membrane press machine

                                                                                                                                                                         

This machine employs a laser automatic scanning system. Initially, the workpiece is placed within the working area. Upon activating the scanning system, the laser scanning system autonomously scans the position of the workpiece on the workbench. As the scanning system traverses, the electromagnet is automatically driven to raise or lower, flipping the top blocks without workpieces to achieve the automatic positioning of the PIN workbench. Subsequently, automatic film stretching takes place, followed by the automatic film covering in the main unit.

 

Feature

1. Fast Speed: The working cycle for an ordinary and high-gloss workpiece entering the main machine and coming out is within 2 minutes, 2-4 times more efficient than common positive and negative pressure membrane press machine.

2. Good Effect: The product processed with ordinary film has clear grooves, no open edges, no bubbling, no color difference. The high-gloss workpiece surface has strong adhesion, reaching international leading levels.

3. Low Energy Consumption: The main heating power of this machine is 35KW, half of the power of similar equipment in the industry. The main heating starting power is 21KW, with an average power consumption of about 12KW/h.

4. High Configuration: Key components of this machine use parts from Germany, Japan, and Taiwan, ensuring high configuration and stable performance.