Melamine Lamination Hot Press Machine Manufacturer
Product Description
Melamine Lamination Hot Press Machine Manufacturer
1、Production
Type of product is melamine board, dimension 2440*1220*(5-30)mm 2800*1220*(5-30)mm
2、Parameters
Engine car for board entry | Quantity | 1set | |
Parameters | velocity | 2500mm/s | |
Motor | 3.8KW |
Hot press | Quantity | 1set | |
Parameters | Total width pressure | 20000KN(2000T) | |
Unit pressure on workpiece | ≦68㎏/cm2 | ||
Master oil cylinder(Dia.*route) | Φ360*250mm 8 pcs | ||
Lift cylinder(Dia.*route) | Φ80*280mm 4pcs | ||
Interlayer distance | 250mm | ||
Size of upper press board | 2600mm*1400mm | ||
Thermal energy configuration | 2600mm*1400mm | ||
Tem. of hot press board | 0.2MW | ||
Compressed air configuration | ≦230。C | ||
Single layer tem. Control for upper hot press board | 400Nm3/h 0.8Mpa | ||
Single layer tem. Control for lower hot press board | 6 entry 6 exit | ||
Orientation way of upper hot press board | 6 entry 6 exit | ||
1. The frame of equipment welded out of 70mm quality carbon steel plate(Q235) of sufficient rigidity and safety coefficiency; 2. Welded frame, underside&working face finely processed by CNC milling machine to make sure press board is even and flat.flatness error≤0.1 0mm; 3.Oil cylinder body forged, highgly strengthened;plunger made of chilled cast iron,high rigidity,resistant to wear,surface rigidity over HRC50; (2-year warranty for cylinder body) 4.Quad crank arms for orientation, steady lifting 5.Lower hot press board fixed to frame by thick screw through side earhook structure. 6. Concealed structure in master oil cylinder,guide ring in oil cylinder,Italian brand for oil seal; insulated pier under plunger to master oil cylinder (One-year warranty for oil seal) 7.Hot press board made of the whole thick steel plate, hot oil route well distributed in the middle for uniform temperature on working board. Abrasive machining in surface of press board,highly smooth, high flatness (≤0.1mm) 8.Fixing method for steel moulding plate:tightening machanism by rapid hooking. 9. Total weight 44T |
Hydraulic system | Quantity | 1set | |
Parameters | Motor Power | 33Kw | |
Oil pump volume | 80L | ||
Working oil pressure | ≦23Mpa | ||
Solenoid valve | Control valve |
Electronic control system | Quantity | 1set | |
Parameters | Control way | Delta PLC+ touch screen |
Secondary circulating tem. Control system | Quantity | 2sets(alternative) | |
Use | Control of hot oil volume at entry while internal circulation of oil in hot press board for even temperature. | ||
Parameters | Pressing temp. | ≦210℃(adjusted to craftsmanship) | |
Motor power | 5.5KW×2 | ||
Features | 1、The system connected to press machine(Pipeline welded by professionals on user’s part, 2、Composed of parts as follows: ①Circulating pump set of hot oil ②Three electrical control valve temperature-controlled meter③High temperature ball valve ④check valve ⑤hot resistance with protective cover. |